Fierastrau pentru taierea spuma poliuretanica

Destination

Saw is destinated for the cutting the foam with a minimum thickness of  5 mm.

Structure

Saw is a mechanical device, electronically controlled with electric drives. It has four separate subassemblies which are components of assembly designed to cut the foam.
The construction of a steel sections linked with the welded 3S St, protected before the corrosion, powder coated and steel.

Cutting frame

consists of a welded steel construction with wheels attached at the base. Inside the frame there are wheels guiding the cutter.

Moving table

is composed of roofed steel structure covered by the aluminum sheet and the vertical lodged with table stationary table.

Stationary table

is composed of roofed steel structure covered by the aluminum sheet and the vertical electric sliding table electrically moved.

Working principle

After putting a block of the foam on the table, move it close to the stationary table. Introduce the cutting settings on the control panel. After pressing the button START the saw start cutting the foam according to the previous settings.


piladopianki

viteză de tăiere 20 m /min
Dimensiunea blocuri tăiate 2000 x 1200 x 1200 mm
Sarcina max pe masa 150 kg
consumul de energie 5 kW 230/400V/50Hz
Dimensiuni( dł. x szer. x wys. ) 7000 mm x 2500 mm x 2800 mm
Greutate 2500 kg

 

Mai mult pe