Saw for foam
Saw is destinated for the cutting the foam with a minimum thickness of 5 mm.
Saw is a mechanical device, electronically controlled with electric drives. It has four separate subassemblies which are components of assembly designed to cut the foam.
The construction of a steel sections linked with the welded 3S St, protected before the corrosion, powder coated and steel.
consists of a welded steel construction with wheels attached at the base. Inside the frame there are wheels guiding the cutter.
is composed of roofed steel structure covered by the aluminum sheet and the vertical lodged with table stationary table.
is composed of roofed steel structure covered by the aluminum sheet and the vertical electric sliding table electrically moved.
After putting a block of the foam on the table, move it close to the stationary table. Introduce the cutting settings on the control panel. After pressing the button START the saw start cutting the foam according to the previous settings.
|Cutting speed||20 m /min|
|Size of the cutted blocks||2000 x 1200 x 1200 mm|
|Max load on the table||150 kg|
|Power consumption||5 kW 230/400V/50Hz|
|Dimentions ( L x W x H )||7000 mm x 2500 mm x 2800 mm|